Joyetech eVic Primo Mini Review

Joyetech , a leading electronic cigarette producer, unveils a more compact version of its eVic Primo box  , logically called eVic Primo Mini, which runs on a single 18650 battery . Here is the Vaping Posttest .

A disappointing finish

To the eye, we are a little disappointed. The finish does not seem at the level of his big sister. The carbon coating seems to be easily damaged. The buttons, the fire especially, are noisy and very plastic. Finally, the plastic battery door located under the box has play when it is loosened. Too bad for Joyetech not to have gone to the end of the concept by combining impeccable quality as for the eVic Primo, because the rest of the box is excellent.

Very pleasant grip

The rounded edges of the eVic Primo Mini give it an excellent grip. With 80 mm high and 39 wide, it fits perfectly in the palm of the hand. You can also walk around your pocket without distorting it. Its width of 25 mm allows it to accept large atomizers without visually shocking. Finally its weight of 86 g makes it very pleasant to handle.

On the top of the box Joyetech, we find the screw 510, which is finally spring. Finally Joyetech listened to its customers! Next to it is a very discreet “Joyetech eVic Primo Mini” engraving.

In frontage, we notice a slight stall between the clearomiseur and the box. The fire button rectangular shape is wide, so easily found with the thumb or index. Below, there is a new larger OLED screen, with 1.3 inches diagonal, a performance for the size of the box. It is protected by a curved plastic shell, a very average finish. At the bottom, there are the + and – buttons, as well as the micro USB port that allows you to quickly recharge in 2 A or upgrade the chipset.

Technical Review

Technical specifications of the Joyetech Primo Mini eVic

  • Length: 39 mm
  • Width: 25 mm
  • Height: 80 mm
  • Weight without battery (s): 86 g
  • Battery : a 18650 battery (not supplied)
  • Power range: from 1 to 80 W
  • Vape Modes: Power / Bypass / Start / Temp (Ni, Ti , SS316) / TCR (M1, M2, M3)
  • Temperature range: from 100 to 315 ° C
  • Resistance range: 0.05 to 1.5 ohms in Temp and TCR mode, 0.1 to 3.5 ohms in Power / Start / Bypass mode
  • Preheat function
  • Maximum charging current: 2 A
  • Maximum discharge current: 25 A
  • 1.3-inch OLED display
  • Connection: 510 on spring
  • Micro USB port: yes
  • Materials: stainless steel
  • Origin: China

The eVic Primo Mini kit includes:

  • An eVic Primo Mini (battery not supplied)
  • A sticker
  • A micro-USB cable
  • A multilingual manual including French with its warranty card

The battery door is plastic and has play

The 18650 battery is as usual not supplied. It is inserted from the bottom of the box. The hatch has 7 degassing holes. It is necessary to slide the hatch to open it and to insert the battery with the positive pole which will go towards the top of the box. Joyetech has also engraved the symbol “-” on the hatch to locate. Small flat for the flap, which, as said above, has play when it is open. 

Focus On www.ave40.com For More Vape Kits.

Joyetech Chipset, always excellent

The eVic Primo Mini works with a single 18650 battery and develops up to 80 W of power. It incorporates the Joyetech chipset version 6.04. Joyetech has already released an upgraded version: 6.06 , which allows setting the power off time when the fire button is pressed. It also displays the W symbol on a white background when the preheat is on.

This preheat is not easy to find. Here’s how to activate it: you have to perform a long simultaneous press on the fire and the + button. There, you access the screen saver function, press +, you access the Logo function, press again + and you finally access the preheat function. Vary the power with + and -, press the fire and vary the time in increments of 0.1 seconds.

The Joyetech chipset is very complete. It offers many vape modes: Power / Bypass / Start / Temp (Ni, Ti, SS316) / TCR (M1, M2, M3). Owners of eVic VTC Mini, Vtwo, etc. will not be lost. We go from one mode to another by clicking 3 times on the fire. In temperature control mode, the chipset is positioned by default on 80 W. It is necessary to click 4 times on the fire to be able to vary the power.

In summary

Positive points :

  • Good ergonomics
  • compact
  • slight
  • Excellent chipset
  • Large, easy-to-read screen
  • Atomizers up to 25 mm accepted
  • Attractive price

Negative points :

  • Very average finish

Conclusion

Our rating: 4.5 / 5 . The eVic Primo Mini is a compact box, light, ergonomic and powerful, suitable for intermediate and experienced vapers. We just regret the rough finish that is not at the level of his big sister or eVic VTwo Mini, which may explain its affordable price.

Focus On www.ave40.com For More Latest Vape News.

Now It’s Available :  Joyetech eVic Primo Mini kit with ProCore Aries atomizer

Hot Sale Recommendation:

Dragon Nord Pod System Kit

Vaporesso Aurora Play Zippo Pod Starter Kit

SMOK Mico Pod Kit

Dovpo Topside Dual Squonk Box Mod

OUMIER WASP Nano RTA 

Leave a Reply

Your email address will not be published. Required fields are marked *