Asvape Michael (Devils Night Edition) Review – Unique in Appearance

Asvape Michael (Devils Night Edition) Review – Unique in Appearance

New product comes from Asvape is the Asvape Michael Box, an eye-catching dual battery regulated box mod with beautifully illustrated artwork covering a gold zinc ally construction. It is beautifully crafted and designed box mod powered by the VO Tech 200W TC chipset. The Asvape Michael Box Mod Devils Night Edition, features a very unique chassis engulfed in beautiful graphic drawn by a famous illustrator which is complimented by the satin gold accenting plates. The well-renowned VO200 chipset is capable of 200W, has a full temperature control suite, is upgradable via the VO Editor program, and is powered by two 18650 batteries (sold separately). Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device. The Michael also features an engraved firing button, engravings surrounding the stainless steel 510 connection, and a sliding magnetic battery access door. The Asvape Michael VO200 TC Box Mod offers a unique presentation backed by a powerful 200W chipset.
For most mods are alike in function, manufacturers can only attract eyeballs through the power ascension, performance optimization and appearance optimization. But on the premise that they can’t provide new functions, the gap between performance must be gradually shrunk. The manufacturers can only put time and energy in appearance.
asvape michael box mod
Then Asvape Michael Box Mod Devils Night Edition look for new ways in changing appearance. It subverts the traditional style. Unique appearance with good performance makes it a screaming buy in vapers.
asvape michael box mod
If you are a vaper attracted by Asvape Michael Box Mod Devils Night Edition, please go on Urvapin to buy it. You will get nice price. Hurry up! Don’t miss the chance.

Best Seller:
Cheaping Vape Deals
Wismec RX GEN3 Kit
SMOK T Priv Starter Kit
Asvape Michael 200W TC Box Mod Devils Night

Asvape Michael VO200 TC Box Mod (Devils Night Edition) Review

Asvape Michael VO200 TC Box Mod (Devils Night Edition) Review

Powered by dual 18650 batteries, Asvape Michael mod is the most luxurious and unique VO200 mod standing out in other mods. You may not be strange to VO chip set because most of you must heard of BMI. The Asvape Michael Mod is using the latest VO200 chip set. Asvape Michael mod is equally luxurious, made out of zinc alloy like most mods but covered by real carbon fiber. The max output wattage of the mod can be 200W. The output mods OUT DIY, TC, VW and Bypass bring vapers fantastic vaping experience. The whole designs of Asvape Michael Box Mod Devils Night Edition come from Ferrari sports car designer idea, you can find his signature is on the mod top. Premium water transfer printing with reasonably sleek-looking make the mod eyes catching and comfortable to hold.

asvape michael box mod
asvape michael box mod
Specifications of Asvape Michael VO200 TC Box Mod:
Edition: Devils night
Weight: 0.4kg
Size: 60* 28* 91.5mm
Power Range: Max 200W
TC Range: 200- 600℉/ 100- 315℃
External Battery: 2x 18650
Chipset: American VO200 chipset
Output Mode: OUT DIY, TC, VW, Bypass
Wire Type: NI, TI, SS316, TCR
Resistance Range: 0.08- 3.0Ω (VW Mode), 0.03- 1Ω (TC Mode), 0.2- 3.0Ω (By pass)

Package of Asvape Michael VO200 TC Box Mod (Devils Night Edition) comes with one Asvape Michael mod with no cell inside, one USB Cable, one User Manual, one Warning Card and one Gift Box.

The above is a brief introduction. Thanks for your viewing, if you are interested in the Asvape Michael VO200 TC Box Mod (Devils Night Edition), appreciate you to check on Urvapin for more details. Welcome to contact us and you will get comparative price with good service.

Best Seller:
https://www.urvapin.com/
https://www.urvapin.com/limitless-200w-tc-box-mod.html
https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html
https://www.urvapin.com/voopoo-drag-157w-tc-box-mod-resin-version.html
https://www.urvapin.com/arms-race-lmc-200w-dual-18650-box-mod.html

Fashionable brand in vape——ASVAPE MICHAEL BOX

Fashionable brand in vape——ASVAPE MICHAEL BOX

The first time I got ASVAPE MICHAEL BOX, its appearance gave me the concept – fashionable brand.

The illustration at the surface of ASVAPE MICHAEL BOX gives you the best touch feeling. The illustration without deliberate protection didn’t scratch or chip with ten day’s use. This may not prove that this illustration design is wear-resisting, at least it is not so fragile.

asvape michael box mod
The ASVAPE MICHAEL BOX is equipped with a manual in it. There is very detailed operating and parameter.
Through the visual impact of the illustration, collocation with golden sand blasting metal frame, we can find the overall color of ASVAPE MICHAEL BOX is full of OLD SCHOOL style.

asvape michael box mod

Powered by double 18650 battery, the ASVAPE MICHAEL BOX is not too heavy even after installing batteries. It’s volume is 60 * 28 * 91.5 MM, which is larger than most of the same kind in the market. Many vapers may mention why not make it smaller? Actually after touching the radian and the rubberized surface, you will say it feels good and comfortable in hand.

The workmanship and texture of the bottom heat emission holes and the delicate ignition key can be clearly seen from the pictures. The 510 interface has a number of grooves and the ASVAPE logo around it.

Through the radian, pressing down on the ignition key makes you feel full, and the ignition key feedback also let a person feel very comfortable. It supports 24 mm atomizer perfectly. The max 200 w output, for most atomizer is suitable.

You just need to press and push to open the battery cover. Inside the tube, there is insulating layer and spring-loaded gold-plated electrodes. The workmanship and texture has a strong persuasion.

ASVAPE MICHAEL BOX‘s appearance, design, detail makes s person feel satisfied. With such perfect “shell”, it adopts the well-renowned VO200 chipset.
From a variety of experience, ASVAPE MICHAEL BOX is not only win by appearance. With features of independence, originality and individuality, taste, and attitude, I prefer to call it a fashionable brand which gives consideration to both appearance and strength in vape. If you have interests, you can go on Urvapin to buy it.

Best Seller:
Cheaping Vape Deals
Wismec RX GEN3 Kit
SMOK T Priv Starter Kit
Asvape Michael 200W TC Box Mod Devils Night

Asvape Michael VO200 TC Box Mod

Asvape Michael VO200 TC Box Mod

As America and European nations have witnessed the rising of vaping over the last few years, the Asvape Michael Mod couldn’t have been come into the market at a more suitable time. Asvape Michael Mod Devils Night Edition, drawn by a famous illustrator, could be called the most unique and exclusive VO200 Box Mod out there. You may be familiar with the VO chipset as you may or may not heard of BMI, the Michael Mod is using the latest VO200 chip set. Powered by dual 18650 batteries, the output wattage can be 200W. The output modes includeOUT DIY, TC, VW and Bypass. Like most of other mods, the Michael Mod is also made out of zinc alloy, but it’s covered by real carbon fiber.The design adopts premium water transfer printing with reasonably sleek-looking. The powerful VO 200W chipset brings fantastic vaping experience for vapers.Smooth contour curve makes the mod aesthetically pleasing and comfortable to hold.

asvape michael box mod
Asvape Michael 200W TC Box Mod Devils Night Edition Features & Spec:
Size: 91*51*34mm
Power Range: max 200W
TC Range: 200-600℉/100-315℃
External Battery: 2*18650
Tread Type: 510
Resistance Range: 0.08-3.0Ω (VW Mode), 0.03-1Ω (TC Mode), 0.2-3.0Ω (By pass)
Output Mode: OUT DIY, TC, VW, Bypass
Wire Type: NI, TI, SS316, TCR

Asvape Michael 200W TC Box Mod Devils Night Edition Package:
1 * Asvape Michael mod (Battery not include)
1 * USB Cable
1 * User Manual
1 * Warning Card
1 * Gift Box

asvape michael box mod

The unique colorful appearance makes the Asvape Michael Mod Devils Night Edition a fashionable brand among other mods. People who pursue fashion and individuality can’t miss it. Buy Asvape Michael Mod Devils Night Edition on Urvapin, you can enjoy a nice price and service.

Best Seller:
https://www.urvapin.com/
https://www.urvapin.com/limitless-200w-tc-box-mod.html
https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html
https://www.urvapin.com/voopoo-drag-157w-tc-box-mod-resin-version.html
https://www.urvapin.com/arms-race-lmc-200w-dual-18650-box-mod.html

Eleaf iStick Pico 25 85W TC Starter Kit

The Eleaf iStick Pico 25 85W TC Starter Kit is a compact single 18650 (sold separately) powered box mod paired with the Eleaf Ello 25mm Sub-Ohm Tank. The iStick Pico 25 features a three piece body design, a 85W chipset with full TC support, and fits atomizers up to 25mm in diameter. The Ello 25mm Sub-Ohm Tank features an expandable tank section, allowing users to use the compact size for 2ml capacity or the extended size for 4ml capacity; a sliding top fill system; two different drip tips; and uses the HW series coils. Full Temperature Control Output

iStick Pico 25 85W TC Features:
1 to 85W Power Output
0.1 to 3.5 ohm Atomizer Resistance Range
Bypass Mode Feature
Firmware Upgradeable
Ni200 Nickel Support
Titanium Support
Stainless Steel Support
Three Memory TCR Mode
Set Own Temperature Coefficient of Resistance
Fine Tune Output
0.05 to 1.5 ohm Atomizer Resistance Range
200 to 600 degrees Fahrenheit Range
Ultra Compact Form Factor
48mm by 25mm by 70mm
0.91″ OLED Screen
Battery Life Indicator
Output Wattage/Temperature
Output Amps
Atomizer Resistance
Single 18650 Powered
Top Loaded
Battery Not Included
Micro USB Charge Port
2A Max
Three Button Operation
Oversized Firing Button
Bottom Button Adjustment
Spring Loaded 510 Connection

Product Includes:
One iStick Pico 25 85W TC Box Mod
One Ello Sub-Ohm Tank
One HW1 0.2 ohm Coil
One HW2 0.3 ohm Coil
One 4ml Glass Segment
One Chimney Extension
Micro USB Charging Cable
User Manuals

The iStick Pico 25 85W TC Starter Kit, with its compact and stylish design, convenient retractable top fill Ello 25mm Sub-Ohm Tank, and upgradable firmware, makes this kit a great choice for all vapers. If you want to buy one, you can look for it on urvapin.

Best Seller:
https://www.urvapin.com/
https://www.urvapin.com/limitless-200w-tc-box-mod.html
https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html
https://www.urvapin.com/voopoo-drag-157w-tc-box-mod-resin-version.html
https://www.urvapin.com/arms-race-lmc-200w-dual-18650-box-mod.html

85W iStick Pico 25 box mod

The iStick Pico 25 ingeniously packs a big 0.91-inch screen that offers a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is capable of outputting a maximum power of 85W and can handle various tanks up to 25mm diameter. The ELLO atomizer that features the HW coil for ultimate flavor and retractable top for easy filling pairs with the iStick Pico 25 perfectly in terms of both appearance and performance.

With a compact size, the iStick Pico 25 with ELLO is very comfortable to hold and carry. Powered by single 18650 battery, it is capable of outputting a maximum power of 85W. The iStick Pico 25 features a big 0.91-inch screen that offers concise and clear interfaces. And there are three switchable interfaces for you to choose the one you’re most accustomed to.

The iStick Pico 25 can handle various tanks up to 25mm diameter. With a maximum charging current of 2A, the battery in the iStick Pico 25 can be fully charged much more quickly. The iStick Pico 25 is powered by a single 18650 battery, allowing to always carry spare batteries with you. Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. And the firmware is upgradeable to be always the latest. The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging. The 18650 battery can be charged in the iStick Pico 25 through the side USB port via wall adapter or computer or charged with an external battery charger.

Eleaf 85W iStick Pico 25 box mod Features & Spec:
Output wattage: 1-85W
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 battery(Continuous discharge current should be above 25A)
Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Resistance range: 0.05-1.5ohm (TC modes), 0.1-3.5ohm (VW mode)
Eleaf 85W iStick Pico 25 box mod Package:
1 * iStick Pico 25 (without battery)
1 * QC USB Cable
1 * User Manuals
Spare Parts

Best Seller:
https://www.urvapin.com/
https://www.urvapin.com/limitless-200w-tc-box-mod.html
https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html
https://www.urvapin.com/voopoo-drag-157w-tc-box-mod-resin-version.html
https://www.urvapin.com/arms-race-lmc-200w-dual-18650-box-mod.html

Eleaf iStick Pico 25 Box Mod Starter Kit Preview

Coming soon from Eleaf is another in the now famous Pico line of very small, single 18650 cell, moderate wattage box mods and a sub-ohm tank. The sub-ohm tank this time is the ELLO Tank, with two coil heads included in the box.

The iStick Pico 25 features 0.91-inch screen with a bright and clear interface, 2A quick charge capability and its firmware upgradeable. It has the preheat function found in most Eleaf/Joyetech/WISMEC mods, but this time it’s in a compact PICO size package. Colors available will be Red/Black, Light Blue/White, Lime Green/White, and Stainless/Black.

The Eleaf iStick PICO 25 is powered by single 18650 battery, with a maximum power of 85W. The Kit comes with the ELLO Tank, but the mod itself can handle any tank up to 25mm diameter.

The ELLO atomizer features the new HW coil for supposedly good flavor, plus a retractable top cap for easy fill slots. For all intents and purposes, this is a throwback to the original Pico style box mod, with an upgraded chip, 85W of power, and a new, low resistant ELLO Sub-Ohm tank as a part of the kit.

Features of the iStick Pico 25:
Size: 25.0mm*48.0mm*104.0mm
Weight: 143.2g
E-liquid capacity: 2ml
Output wattage: 1-85W
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 battery
(Continuous discharge current should be above 25A)
Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Resistance range: 0.05-1.5ohm (TC modes)
0.1-3.5ohm (VW mode)

Eleaf iStick Pico 25 with ELLO Full Kit comes with
1x iStick Pico 25 (without battery)
1x ELLO Atomizer
1x HW1 Single-Cylinder 0.2ohm Head
1x HW2 Dual-Cylinder 0.3ohm Head
1X QC USB Cable
2x User Manuals
Spare Parts

The Eleaf iStick Pico 25 Full Kit will be available at urvapin.

Best Seller:
https://www.urvapin.com/
https://www.urvapin.com/limitless-200w-tc-box-mod.html
https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html
https://www.urvapin.com/voopoo-drag-157w-tc-box-mod-resin-version.html
https://www.urvapin.com/arms-race-lmc-200w-dual-18650-box-mod.html

Eleaf iStick Pico 25 with ELLO Launching

Eleaf is so glad to introduce you an upgraded version of the popular iStick Pico, the iStick Pico 25.

The iStick Pico 25 adopts a big 0.91-inch screen, which offers the users a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is able to output a maximum power of 85W and can handle various tanks up to 25mm diameter. The ELLO atomizer that features the HW coil for ultimate flavor and retractable top for easy filling pairs with the iStick Pico 25 perfectly in terms of both appearance and performance.

Eleaf iStick Pico 25 use new interface for VW mode displays resistance of coil, wattage setting and battery bar more clearly, allowing you to have a check easily by a simple glance.

The Smart mode will save one output power setting for each resistance value and can totally save ten groups of such profiles. Once you change the output power setting for a resistance, it will re-save the changed setting automatically. When the Smart mode has already remembered ten profiles and you want to add another new resistance, the first saved profile will be deleted.

You can download or make logos to your preference and put the favorite one in the mod. The logo should be single color picture in the format of bmp with limited 96*16 pixel.

Steps on how to put logo in the mod:
a.Open the picture you chose with Paint, edit it to be a single color picture of 96*16 pixel, and save it in format of bmp.
b.Download the file on our website, plug the mod in with USB cable, and double click the EleafUpdate.exe.
c.Click “LOGO” and open the picture you saved, finally the custom logo is successfully put in the mod.
d.Press the fire button twice in quick succession when the mod is powered on to enter logo on/off interface and press up or down button one time to turn on or off logo.
e.When you turn on logo and the mod enters standby mode, the logo appears on the screen till the mod goes to sleep mode.

Best Seller:
https://www.urvapin.com/
https://www.urvapin.com/limitless-200w-tc-box-mod.html
https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html
https://www.urvapin.com/voopoo-drag-157w-tc-box-mod-resin-version.html
https://www.urvapin.com/arms-race-lmc-200w-dual-18650-box-mod.html

Eleaf iStick Pico 25 Box Mod Starter Kit Preview

Coming soon from Eleaf is another in the now famous Pico line of very small, single 18650 cell, moderate wattage box mods and a sub-ohm tank. The sub-ohm tank this time is the ELLO Tank, with two coil heads included in the box.

The iStick Pico 25 starter kit features 0.91-inch screen with a bright and clear interface, 2A quick charge capability and its firmware upgradeable. It has the preheat function found in most Eleaf/Joyetech/WISMEC mods, but this time it’s in a compact PICO size package.Colors available will be Red/Black, Light Blue/White, Lime Green/White, and Stainless/Black.

The Eleaf iStick PICO 25 is powered by single 18650 battery, with a maximum power of 85W. The Kit comes with the ELLO Tank, but the mod itself can handle any tank up to 25mm diameter.

The ELLO atomizer features the new HW coil for supposedly good flavor, plus a retractable top cap for easy fill slots. For all intents and purposes, this is a throwback to the original Pico style box mod, with an upgraded chip, 85W of power, and a new, low resistant ELLO Sub-Ohm tank as a part of the kit.

Features of the iStick Pico 25:
Size: 25.0mm*48.0mm*104.0mm
Weight: 143.2g
E-liquid capacity: 2ml
Output wattage: 1-85W
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 battery
(Continuous discharge current should be above 25A)
Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Resistance range: 0.05-1.5ohm (TC modes)
0.1-3.5ohm (VW mode)

Eleaf iStick Pico 25 with ELLO Full Kit comes with
1x iStick Pico 25 (without battery)
1x ELLO Atomizer
1x HW1 Single-Cylinder 0.2ohm Head
1x HW2 Dual-Cylinder 0.3ohm Head
1X QC USB Cable
2x User Manuals
Spare Parts

The Eleaf iStick Pico 25 Full Kit will be available at urvapin.

Best Seller:
https://www.urvapin.com/
https://www.urvapin.com/limitless-200w-tc-box-mod.html
https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html
https://www.urvapin.com/voopoo-drag-157w-tc-box-mod-resin-version.html
https://www.urvapin.com/arms-race-lmc-200w-dual-18650-box-mod.html

Eleaf iStick Pico 25 with ELLO Sub-Ohm Starter Kit Launching

Eleaf is so glad to introduce you an upgraded version of the popular iStick Pico, the iStick Pico 25

The iStick Pico 25 adopts a big 0.91-inch screen, which offers the users a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 starter kit is able to output a maximum power of 85W and can handle various tanks up to 25mm diameter. The ELLO atomizer that features the HW coil for ultimate flavor and retractable top for easy filling pairs with the iStick Pico 25 perfectly in terms of both appearance and performance.

Eleaf iStick Pico 25 use new interface for VW mode displays resistance of coil, wattage setting and battery bar more clearly, allowing you to have a check easily by a simple glance.

The Smart mode will save one output power setting for each resistance value and can totally save ten groups of such profiles. Once you change the output power setting for a resistance, it will re-save the changed setting automatically. When the Smart mode has already remembered ten profiles and you want to add another new resistance, the first saved profile will be deleted.

You can download or make logos to your preference and put the favorite one in the mod. The logo should be single color picture in the format of bmp with limited 96*16 pixel.

Steps on how to put logo in the mod:
a.Open the picture you chose with Paint, edit it to be a single color picture of 96*16 pixel, and save it in format of bmp.
b.Download the file on our website, plug the mod in with USB cable, and double click the EleafUpdate.exe.
c.Click “LOGO” and open the picture you saved, finally the custom logo is successfully put in the mod.
d.Press the fire button twice in quick succession when the mod is powered on to enter logo on/off interface and press up or down button one time to turn on or off logo.
e.When you turn on logo and the mod enters standby mode, the logo appears on the screen till the mod goes to sleep mode.

https://www.urvapin.com/

https://www.urvapin.com/limitless-200w-tc-box-mod.html

https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html

https://www.urvapin.com/smoant-charon-218w-zinc-alloy-tc-box-mod.html