FIRST IMPRESSION OUT OF THE BOX
DeucesJack: What’s up everybody? DeuceJack at vapinginsider.com. I got the Wismec Luxotic BF mod today. Boy, did they send me the right color. Look at that beautiful green honeycomb. Let’s not waste any time because we got a lot to go over. We got an addie here. We got tons of stuff to go over. I’m going to show you the insides of it, the [Inaudible 00:34] Let’s cut down low, we’ll see back on top real soon. See you down low.
WHAT’S IN THE BOX
- 1 x Wismec Luxotic Squonk Box Mod
- 1 x Tobhino RDA
- 1 x Spare Parts Bag
- 1 x Regular 510 connection
- 1 x Allen Keys
- 1 x Extra Squonk Bottle
- 2 x 0.18 ohm Clapton Coils
- 1 x Organic Cotton
- 1 x 810 Top Cap
- User Manuals and Warranty Card
Alright everyone, welcome to the down low portion of this video. Today we are going to be going over the Wismec Luxotic BF box. This is a sample that was sent to me directly from Wismec.
Let’s take a quick tour around the box. A little bit of wismec branding, some Luxotic branding, scratch and sniff, Wismec.com, more Wismec branding. On the back, we have a Luxotic BF box included in the kit. A Tobhino BF RDA, 7 ml liquid bottle, a .18 clapton coil, some cotton, 810 drip tip, adapter, 2 user manuals, warranty card and spare parts. This mod is good up to 100 watts as a maximum output wattage.
Let’s take this thing out. Let’s see exactly what it looks like. Beautiful green. Love the dual cases that Wismec uses on their products. Let’s take the mod out of the box and put it to the side for a second so I can show you the content. Rubber part comes out, here’s what you get in the box. Some cotton, battery safety card, this is your Tobhino instruction manual and your Luxotic BF box instruction manual. In the little box over here, let’s see what we get. We get an ultem 810 drip tip adapter, hex key, spare o rings, traditional 510, some spare port screws and there is your clapton coils. Take note of them. They are kind of precut for the Tobhino RDA. let’s file all this stuff to the side.
FROM TOP TO BOTTOM
Let’s go over the actual mod itself. Here we go. These are your doors right here. Very nicely done. Magnet goes over here. This magnet goes on to the battery, these two. Nice squonk hole. I like the green honeycomb look. Good job on that. Nice fit. Man. they don’t move. They did a great job on that. Here is your battery stuff. A little bit of Luxotic BF box design by Japo. A little bit of their branding all inside there.
This is your squonk bottle door. Kind of got that graving look. It’s magnetized. I wish the magnet was a little stronger. In order to get your squonk bottle out, you simply slide it from the bottom. You have this rod here and then your bottle just scoops right back in there. Very very easy to hack this. I’ve done it on one of mine. You can pull this out. You can pull this part out and you can basically cut over here, right around there with a [Inaudible 03:47] and you can use a regular squonking bottle. The coil master bottle works extremely well in it.
On the top here, we have some clear battery indicator markings I wish they would have done in a different color. This is a positive side up mod. Gold plated button style contacts over here, spring loaded gold plated battery contact over there. Nice clicky fire button. Real nice job on that. I kind of like the Wismec branding over here. I know a lot of people don’t. They did a nice job because it’s the same color as the body of the mod so I don’t find it too intrusive. It’s really not that bad.
This is your Tobhino RDA. It comes with a 510, ultem one thing I don’t like, the ultem here and the ultem here don’t match. I think that’s a bad job by Wismec. You can see this whole thing just basically comes apart. There’s your top cap made out of ultem.
One thing I really do like about this RDA is the fact that it comes with the beauty ring. I just wish they would have matched it better. On the bottom, we have some some Tobhino branding with gold plated squonking pin, insulator ring around it, stainless steel threading over here, very smooth phillips head, negative post screw right here, some BF and Japo branding with some Wismec branding.
In order to take this apart, here is your sleeve. You have 3 airflow slots, the barrel is held in place by a nice oring over here. The tolerance is very good. Here is your Tobhino deck. Nice juice well. Raised squonking pin. Both of your coil leads go into there. Here are your [Inaudible 05:45] keys right here so you can unscrew your post. Here is your airflow. I don’t know if you can see that. Let me see. It’s kind of got a little bit of an angle to it like an angled downward. So you want to make sure, you place your coil in here and then you kind of push it down. They give you these little cut outs over here to be able to get your coil rod in there. Push it down. Fairly easy to build on. The hardest part is getting the bend right. If you’re not using one of their coils. I would suggest that you keep one of their cols and use it as a reference in order to see where you can cut your leads. That would probably be a good thing.
Here’s a little trick. Jabo told taught me this when I met him at ECC in California because I kind of told him, I said, “Hey, bro that airflow on there, I wish it was a little looser.” and you know what he told me? He said, “Hey Jack, just take the airflow and put it on the side, like that.” you want to know something? Even though the airflow is facing your cotton wicks, it is much airier on that and the flavor’s actually really good because it’s a small chamber. It just works. He was right. So I just want to tell you, that’s a little trick Jabo gave me.
That’s about all I have for you on the down low. Let’s cut back on top. Let’s talk about it a little bit. We’ll go over cons, pros and then we’re out of here as usual. See you back on top.
Alright everyone, we’re back on top. You just saw the Wismec Luxotic BF Kit down close and personal with yours truly, DeucesJack. This one I’ve been rocking for quite some time. I’ve had it since February, since ECC. In fact, the man himself, Jabo, personally gave this one to me at the convention. But you guys know how I roll. I aint part of the Vape Mafia. It’s going to get an honest review here no matter what. Even though Jabo is a great guy and we did a great interview together, – make sure you check it out on the link down below – but I’m still going to give it to you straight.
So let’s talk about it a little bit. Let me tell you something, man. I’ve been really really enjoying it. I’m not crazy about the bottle. The bottle is that cheap plastic bottle. It does have a 7ml capacity but it’s hard and I don’t like that metal rod coming down at the middle. But the good news is, it’s an easy hack. Plenty of people hack this thing. Search it on YouTube, you’ll see all you really need is a dremel tool and one of those cans of air to blow it out when you’re done. Love this little Tobhino RDA single coil. You know me, I love my one lungers. This one is no different. Really really nice RDA. A little bit of a pain in the neck to build on but not terrible. I definitely like it. I really do.
Love the beauty ring. Love the simplicity. Love the fact that all the protections are built in to this thing. Great job on that. I tell you what, I love the looks and the form factor. This thing looks like a higher end squonker. It really does. Price point on it, though I’ve seen it for $150. This is a good buy, man.
It vapes really really well but let’s get into all the official cons and pros.
First con is going to be the magnets on the squonk door. It’s a little bit, I don’t know. Man. It’s never really come off on me. I just wish it was stronger. It would make me feel better. The door for the squonker could be a little better.
The other con is going to be, the Tobhino is not the easiest RDA in the world to build on. You kind of have to cut your wires, pre-cut them perfect. I would definitely suggest you take an old coil, keep it, the one that came in the kit. So you always have a reference to cut your new coils when you put them in here. Round wire builds are tough to build in here because of those flat squarish slots. They’re tough to trap. That’s going tobe a top con.
The other con is going to be the ultem. The beauty ring on the Ultem does not match the ultem on top. I don’t like that. I think Wismec could have done a better job on that.
Other con is going to be the bottle. Included bottle is crap. It’s horrible. Good news is, Wismec released silicon bottles that fit this so go check it out. I think the new one that they released now comes with the silicon bottle. It doesn’t come with the plastic one that I got.
The other con is going to be the bottle that they included, it’s dark. It’s very hard to see your e liquid through. Why didn’t they make it clear? I don’t understand that.
Now, let’s get down to the pros because there’s a bunch of them. First pros is going to be build quality. This thing’s build solid. Solid little device, love it.
Second pro, form factor. Look at this thing. This thing just feels great in the hand. You can finger fire it or thumb fire it. Awesome job on that.
Price point. I’m going to give them a pro on that. $50 for this kit. That’s a good one, man. Let me tell you. Good price point.
Fires down as low as .08 ohm. I’ll give them a pro for that. It’s got built-in protection. It’s got a chipset. A small little chipset on the side there. You got all that reversed polarity, overheat protection. Good job on that. We like being safe.
Let’s give them a pro on 5 clicks on, 5 clicks off. I like the fact that you can shut this mod off, put it in your pocket. Great job.
I like the doors. The fact that you can take the door, you can buy separate one and swap it out and have anew mod for everyday of the week. Good job on that Wismec.
Going to give them a pro on the flavor. This Tobhino chucks in flavor, man. Got some good flavor. Let’s give them a pro on the nice juice well. The juice well on the Tobhino is nice and deep. Good job on that.
Even though they gave us a crappy bottle, I’m going to give them a pro for giving us crappy bottles. At least they included 2. That’s pro.
25ml with no overhang, pro on that.
Let’s give them a pro on that awesome first button. Nice and clicky, nice tactile feel to it. Great job on that.
Let’s give them a pro on the subtle branding. It’s got that big Wismec on the end there. It’s stainless steel on stainless steel. It’s not that bad. It’s not that intrusive. I like it.
Give them a pro on the capacity. 7ml capacity. Great job on that. Let’s give them a pro on the fact that this is one of the top squonkers on the market today. It’s tough to beat. Really is. At this price point especially. Great job on that.
I’m going to give them a pro – even though they probably won’t like this pro Wismec – but this thing is easy to hack. You want to put a squishy bottle in there like I did? See that? I got a silicon bottle in there. Go on to YouTube, type in ‘Loxotic Hack’. You’ll see a bunch of video on how to do it.
The new luxotic kit has been released,click here to know:wismec luxotic DF box mod kit
Now It’s Available :Wismec Luxotic BF BOX 100W Kit with Tobhino BF RDA
Hot Sale Recommendation: